12-in-1 Hub USB-A/C + HDMI + DP + RJ45 + TF + SD + AU
53,83 €
VAT included · Delivery to mainland Spain and the Balearic Islands
Shipping: 6,05 €
Typical transit after dispatch: 24 h to mainland Spain and 48 h to the Balearic Islands. Estimate depends on destination and availability.
Only 2 left
Total including shipping: 59,88 € · Free shipping from 301,00 €
Nanocable 12-in-1 hub expands your laptop's connectivity with 4K video outputs, Gigabit Ethernet, card readers and audio. Compatible with USB-C devices supporting DP Alt mode or Thunderbolt 3.
About this product
The Nanocable 12-in-1 hub is a complete solution to expand the capabilities of your USB-C laptop or device. It includes two HDMI outputs with 4K@60Hz resolution (up to 3840×2160 pixels; in RGB mode only 4K@30Hz is supported, and 4K@60Hz only in YCbCr mode), a DisplayPort output 4K@60Hz, a 1 Gbps RJ45 Ethernet port, TF and SD card slots, and a 3.5mm audio jack. The hub's USB-C port is for charging only and does not transfer data. It requires no software or drivers, fully plug and play. Important: not all USB-C devices are compatible with the video output; it will only work with those supporting Thunderbolt 3 or DisplayPort Alt Mode (DP Alt). The integrated cable is 18 cm long and the body is made of aluminum alloy and ABS, in grey. It complies with RoHS and is 100% tested.
What can you use it for?
- Connect a USB-C laptop (compatible with DP Alt or Thunderbolt 3) to an HDMI or DisplayPort monitor to expand your workspace. The source does not confirm simultaneous use of all video outputs.
- Add a 1 Gbps wired Ethernet connection to an ultrabook without an RJ45 port for a more stable network.
- Transfer photos and videos from SD or microSD cards to a computer using the integrated slots.
Its strengths
- Offers multiple high-resolution video outputs: two HDMI 4K@60Hz (in YCbCr mode) and one DisplayPort 4K@60Hz.
- Includes a wide variety of ports in one compact device, including Ethernet, card readers and audio.
- No software or driver installation required, plug and play operation.
Things to consider before buying
- The hub's USB-C port is for charging only, no data transfer.
- HDMI video output only works with devices supporting Thunderbolt 3 or DP Alt mode; not compatible with all USB-C.
Product questions
Will this hub work with my USB-C laptop?
Not all USB-C devices are compatible with the video output of this hub. It will only work with devices that have Thunderbolt 3 or support DisplayPort Alt Mode (DP Alt). Check your device's specifications before purchasing.
Can I use the hub's USB-C port for data transfer?
No, the USB-C port on this hub is for charging only and does not transfer data.
What types of memory cards are supported?
The TF slot supports Micro SDXC, Micro SD and Micro SDHC. The SD slot supports SDXC, SDHC, SD, MMC and RS-MMC. Transfer speed is 20-40 MB/s.
ALMC analysis prepared with AI assistance using the supplier’s product information. It is not a product test or a customer review. Check the specifications and confirm the compatibility you need.
Technical specifications
| Marca | Nanocable |
| Modelo | 8433281015579 |
| Características | - Conexión USB-C Carga (No transfiere datos) - 2 conexiones HDMI, 4K@60Hz. Hasta 3840×2160 píxeles a 60Hz * El chip de vídeo en modo RGB, solo admite 4K/30Hz, pero en modo YCbCr puede alcanzar 4K/60Hz - Conexión DisplayPort 4K@60Hz - Conexión RJ45 Ethernet 1Gbps - Ranura TF, soporta Micro SDXC, Micro SD, Micro SDHC Card. Velocidad de transferencia de 20-40 MB/s - Ranura SD, soporta SDXC, SDHC, SD, MMC, RS-MMC Card.Velocidad de transferencia de 20-40 MB/s - Conexión audio, puerto Jack 3.5mm * No requiere software ni controladores, una solución totalmente plug and play. * NO todos los dispositivos con conexión USB-C pueden trabajar con la salida de HDMI de este adaptador. SOLO los dispositivos con Thunderbolt3 o con conexión USB-C que soportan el modo DP ALT (el modo DisplayPort Alt o el modo alternativo de DisplayPort). - Longitud del cable: 18 cm - Color: Gris - Material: Aleación de aluminio + ABS - Normativas: RoHS - Test de Funcionamiento: 100% testado Dimensiones - 14,3 x 5,8 x 1,5 cm |
| Fecha de revisión | 03-07-2025 por RTY |
Product identifiers
| Reference | AISCCI0739 |
|---|---|
| EAN | 8433281015579 |
| Part number | 10.16.4612 |
| Manufacturer | NANOCABLE |
Delivery, returns and warranty
We deliver to mainland Spain and the Balearic Islands. Shipping costs are shown before payment.
14 calendar days to withdraw without giving a reason. See conditions and exceptions. How it works.
3-year statutory warranty.
