10.15.2600 DisplayPort 1.4 Cable DP/M to DP/M 0.5m Black
3,65 €
VAT included · Delivery to mainland Spain and the Balearic Islands
Shipping: 6,05 €
Typical transit after dispatch: 24 h to mainland Spain and 48 h to the Balearic Islands. Estimate depends on destination and availability.
Only 1 left
Total including shipping: 9,70 € · Free shipping from 301,00 €
Nanocable DisplayPort 1.4 cable, model 10.15.2600, with male DP to male DP connectors and 0.5m length. Transmits video up to 8K 60Hz and high-definition audio, ideal for connecting PC or laptop to compatible monitors.
About this product
The Nanocable DisplayPort 1.4 cable, model 10.15.2600, provides a reliable connection between devices with DisplayPort output and monitors or displays with DisplayPort input. With a length of 0.5 meters, it is suitable for desktop setups where the distance is short. It supports video resolutions up to 8K (7680x4320) at 60Hz, 4K (3840x2160) at 60Hz, 120Hz or 144Hz, and 2K (1080p/1440p) at 120Hz, 165Hz or 240Hz, according to the manufacturer. Its maximum transmission speed is 32.4 Gbps and it has double bandwidth. The connectors have gold-plated pins for better conductivity and corrosion resistance. The cable uses twisted wires and aluminum foil shielding, and oxygen-free copper conductors (99.99% OFC) to minimize signal loss. It is backward compatible with DisplayPort versions 1.0, 1.1, 1.2 and 1.3. It also supports high-definition audio formats such as Dolby MAT, DTS HD and BD, with 32 LPCM channels, audio-video synchronization and multiple audio channels. It includes 128-bit AES DisplayPort Content Protection (DPCP). It complies with RoHS regulations and has been 100% tested.
What can you use it for?
- Connect a desktop or laptop with DisplayPort output to a compatible monitor to enjoy high resolutions and high refresh rates.
- Transmit high-definition audio along with video through a single cable, avoiding additional cables.
- Use in multi-monitor setups thanks to the possibility of connecting multiple monitors through a single connector (requires compatible hardware).
Its strengths
- Supports resolutions up to 8K at 60Hz and 4K at 144Hz, ideal for gaming and high-resolution content.
- Gold-plated pins and OFC copper conductors for reliable signal transmission.
- Backward compatible with older DisplayPort versions, expanding compatibility with older devices.
Things to consider before buying
- The 0.5m length may be insufficient for setups where devices are far apart; check the required distance before purchasing.
Product questions
What resolutions and refresh rates does this cable support?
According to the manufacturer, it supports up to 8K (7680x4320) at 60Hz, 4K (3840x2160) at 60Hz, 120Hz or 144Hz, and 2K (1080p/1440p) at 120Hz, 165Hz or 240Hz.
Is it compatible with older DisplayPort versions?
Yes, it is compatible with DisplayPort 1.0, 1.1, 1.2 and 1.3, in addition to 1.4.
What type of connectors does it have?
It has male DisplayPort connectors on both ends (DP/M to DP/M).
ALMC analysis prepared with AI assistance using the supplier’s product information. It is not a product test or a customer review. Check the specifications and confirm the compatibility you need.
Technical specifications
| Marca | Nanocable |
| Modelo | 10.15.2600 |
| Características | - Compatible con DisplayPort versión 1.0, 1.1, 1.2 y 1.3 - Soporta resoluciones de vídeo de hasta: 8K (7680x4320) a 60Hz 4K (3840x2160) a 60Hz/120Hz/144Hz 2K (1080P/1440P) a 120Hz/165Hz/240Hz - Conectores con pines blindados en oro - Hilos trenzados y lámina de aluminio - Conductores de cobre (cobre OFC-Oxygen Free Copper- 99,99%) - Velocidad máxima 32,4 Gbits/s - Doble ancho de banda - Posibilidad de conexión de varios monitores a través de un único conector - Formatos de alta definición de audio (como Dolby MAT, DTS HD, BD, etc.)32 LPCM - Sincronización entre el audio y el vídeo - Múltiples canales de audio - Sincronización entre varios dispositivos de audio que utilicen el servicio Global Time Code - Soporta 128-bit AES Protección de Contenido de Displayport (DPCP). - Longitud: 0.5 m - Normativas: RoHS - Test de Funcionamiento: 100% testado Contenido - 1 x Cable Displayport 1.4, DP/M - DP/M, Negro, 0.5 m |
| Fecha de revisión | 09-01-2025 por RTY |
Product identifiers
| Reference | AISCCI0715 |
|---|---|
| EAN | 8433281015012 |
| Part number | 10.15.2600 |
| Manufacturer | NANOCABLE |
Delivery, returns and warranty
We deliver to mainland Spain and the Balearic Islands. Shipping costs are shown before payment.
14 calendar days to withdraw without giving a reason. See conditions and exceptions. How it works.
3-year statutory warranty.
